ADR CRU Producer
ADR CRU PRODUCER
ADR High Speed CRU Producer is a standalone copystation in 4U 19" rack format that copies CRU DX115 DC Carriers without the need for a PC. This device is expandable via the ADR CRU-Producer Slave unit.
Introduction:
Copying CRU Standard Carrier DX115 DC is easier and faster than ever with the new ADR High Speed CRU-Producer. The CRU Producer comes in a 4U 19" rack and can be easily expanded as desired. Only one Master unit is required and several Slave units can be connected to the Master unit to suit your needs. All targets are controlled via the Master Controller. As there is virtually no limit to the number of target systems you can connect to the Master, it is possible to realize the largest CRU copy system on the market. Copy speeds are not affected no matter how many targets you connect. No PC is required for operation of this standalone device. You can, however, connect it to a PC to be able to make use of the monitoring tool and log reports. This expandable 4U 19" rack CRU Carrier copy system can be upgraded to up to 254 Targets. There are 2 ADR Cru Producer models. The Master unit is equipped with a controller, 4 buttons and an LCD display as well as a slot for the Master HDD and 4 slots for DX115 DC Carrier targets. The Slave unit has 6 target slots and needs to be connected to a Master. Any number of Slave units can be connected to the Master unit which controls them. Performance remains stable and unaffected by the number of target units due to our Daisy Chain technology.Features:
Copy speeds of up to 18 GB/m.
Bit-by-Bit Copy: Copies all data - even unknown formats.
Systems & Files Copy: For known formats such as NTFS, FAT16/32/64, Linux(ext2/ext3/ext4), Mac(HFS/ HFS+/ HFSX) only the data portion is copied to save time.
4 Different Delete Functions:
Quick Erase: Done in a few seconds.
Full Erase: Deletes the entire drive.
DoD Erase: Deletion in accordance with Department of Defence standards.
Secure erase: In accordance with the National Institute of Standards and Technology 800-88 media sanitisation standards.
Log Report:The entire copy process together with all its details such as progress, speed, capacity, model names, serial numbers of all HDDs are recorded. That way you can revisit completed copy tasks if necessary to facilitate troubleshooting, testing results or improving quality control.
PC Monitoring:The PC monitoring tool allows you to observe the entire copy process on your PC Monitor. All relevant info such as write speed, copy time, percentage of progress of each drive and many more are displayed by this professional monitoring tool that lets you supervise the entire copy process.
| Product Code | Model | Description |
|---|---|---|
| ADR1-4CRURACK-HS-M | CRU Master with 4 targets | Expandable with Slave units |
| ADR0-6CRURACK-HS-S | CRU Slave with 6 targets | Daisy chain with Master unit |
Supports All Partition Format for Duplication
Easy to install and expand by stacking all the duplicators in a sturdy server cabinet.
Impeccable efficiency
The duplicator copies at 9 GB/m to all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for industrial use.
Supports All Partition Format for Duplication
Whole HDD Copy supports various partition formats.
Systems & Files Copy, reduces copy time and supports NTFS, FAT16/32/64, Linux (ext2/ext3/ext4) and Mac (HFS/ HFS+/ HFSX).
4 Erase Modes
1. Quick Erase: Erase HDD index table, and takes a few seconds to complete.
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
Event Log
Operational info such as operating progress, speed, as well as capacity, model name and HDD S/N are ALL recorded! Which means if there is an issue that needs to be examined, there is a visible record to make the process simpler. It’s much more convenient for troubleshooting, work responsibility clarification, exporting test reports and work management.
Up to 30,000 log entries can be saved. One command onto one HDD is recorded as one log entry. (e.g. duplication from 1 HDD to 21 targets will be recorded as 21 log entries)
Real Time PC Monitoring
Flawlessly MONITORS work progress during operation. It displays all information, such as writing speed, operation time, percentage of completion, etc. for EVERY PORT, which is a powerful tool for sorting out the HDD writing lag and ensuring the operational efficiency. All the information you need will appear on the PC screen.
1. Monitor duplication status from PC while duplicators are connected to it.
2. "iSecuLog" shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports and the info of both source HDD and target HDD.
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication speed of every port via the “Event Log”
4. In order to export a log report select a period of time and click "Generate Report". The data will be exported into a .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
